Pulse Oximeter Pro for Humans

The Pulse Oximeter and Plethysmograph Sensor measures blood oxygen saturation (SpO2) and pulse pressure (plethysmography) using a dual-wavelength light transmittance based finger clip.

Human pulse oximeter pro outputs the SPO2 and pulse waveform. Measure the Heart Rate using LabScribe software


The Pulse Oximeter measures blood oxygen saturation (SpO2) in humans using a finger or ear clip sensor. The iWire pulse oximeters requires an iWorx Recorder with an iWire port, such as the IX-TA-220 or the IX-RA-834
iWire Pulse Oximeter Specifications
O2 Saturation Range: 80-100%
Pulse Rate Range: 18 to 321 Beats per Minute (BPM)
SpO2 range 80-100%
 Finger Clip: +2 digits
 Ear Clip: +3 digits
Measurement Wavelength Red – 660 nanometers Infrared – 925 nanometers
Temperature range 0 – +50 degrees C
Humidity 10 – 90% non-condensing
Power Draw 60 mW – typical operating
Patient Isolation Dielectric Withstand Meets IEC 60601-1
Leakage Current not applicable
Integrated Finger sensor Dimension 1.26 in. x 1.25 in. x 2 in. (32 mm x 32 mm x 51 mm)
Box Dimensions  2.27 in. x 2.4 in. x 1.0 in. 57 mm x 61 mm x 25 mm)
Units Conversion  80 % -> 0V
100% -> 2V
ie Slope = 10, offset = 80

Compatible Sensors for the PO2-200 series

Design Your System

Choose the parameters you want to Measure

EMG : Number of Channels
Invasive BP : Number of Channels
Non-Invasive BP : Number of Channels
Flow : Number of Channels
Temperature: Number of Channels
Force: Number of Channels
Stimulation: Describe the type

Recover Password

We will contact you with your login info. 

Newsletter Signup