Generic filters

Pulse Oximeter Pro for Humans

The Pulse Oximeter and Plethysmograph Sensor measures blood oxygen saturation (SpO2) and pulse pressure (plethysmography) using a dual-wavelength light transmittance based finger clip.

Human pulse oximeter pro outputs the SPO2 and pulse waveform. Measure the Heart Rate using LabScribe software


Manual: PO2-100D
The Pulse Oximeter measures blood oxygen saturation (SpO2) in humans using a finger or ear clip sensor. The iWire pulse oximeters requires an iWorx Recorder with an iWire port, such as the IX-TA-220 or the IX-RA-834
iWire Pulse Oximeter Specifications
O2 Saturation Range: 80-100%
Pulse Rate Range: 18 to 321 Beats per Minute (BPM)
SpO2 range 80-100%
 Finger Clip: +2 digits
 Ear Clip: +3 digits
Measurement Wavelength Red – 660 nanometers Infrared – 925 nanometers
Temperature range 0 – +50 degrees C
Humidity 10 – 90% non-condensing
Power Draw 60 mW – typical operating
Patient Isolation Dielectric Withstand Meets IEC 60601-1
Leakage Current not applicable
Integrated Finger sensor Dimension 1.26 in. x 1.25 in. x 2 in. (32 mm x 32 mm x 51 mm)
Box Dimensions  2.27 in. x 2.4 in. x 1.0 in. 57 mm x 61 mm x 25 mm)
Units Conversion  80 % -> 0V
100% -> 2V
ie Slope = 10, offset = 80

Compatible Sensors for the PO2-200 series

Design Your System

Choose the parameters you want to Measure

EMG : Number of Channels
Invasive BP : Number of Channels
Non-Invasive BP : Number of Channels
Flow : Number of Channels
Temperature: Number of Channels
Force: Number of Channels
Stimulation: Describe the type

Recover Password

We will contact you with your login info. 

Newsletter Signup