Search
Generic filters

Pulse-Ox: Lingual Clip Sensor ( A-PO2-ALC )

Lingual clip sensor used in conjunction with the PO2-300D Pulse Oximeter for measuring blood oxygen saturation (SPO2) in animals.

$250.00


Manual: A-PO2-ALC

SKU A-PO2-ALC Category
Clip-on sensor for tongue or well-perfused areas, as appropriate. Custom designed grippers hold the application site without excessive pressure. Use in surgery and for monitoring during recovery while patient is immobile.

This sensor can be placed on the right side, left side, or the end of the tongue. Wait approximately 10 to 15 seconds for an adequate pulse signal. If you are unable to obtain an SpO2 reading, move the sensor to another site on the tongue and wait 10 to 15 seconds until an adequate pulse signal is displayed. It is a good idea to secure the cables so the weight of the cable doesn’t move the sensor. If you still have difficulty getting an SpO2 reading, examine the tongue to see if it is quivering. This could be a reaction to certain medications. If the tongue continues to quiver, choose a different sensor site.

  • The vulva or prepuce
    • If the animal is large enough, it has been reported by some veterinarians that the prepuce or vulva might be an alternate site for the lingual clip sensor. Remember that this site must be well perfused and not pigmented.
  • Achilles tendon: On light colored animals (a color of gray or lighter), an alternate application site may be the Achilles tendon. Remove the hair and make sure the skin is not pigmented.

When monitoring oxygen saturation (SpO2), the sensor site must meet the following criteria:

  • Sensor site must be well perfused.
  • Sensor site must allow light to be transmitted through the tissue. (Skin must not be overly pigmented and fur/feathers etc. may need to be removed.)
  • Sensor site must allow proper attachment of the sensor.
    (Note: Certain veterinary drugs may cause reduced perfusion to the sensor site. This could compromise the function of a pulse oximeter.)

Design Your System

Choose the parameters you want to Measure

ECG/EKG
EMG : Number of Channels
Invasive BP : Number of Channels
Non-Invasive BP : Number of Channels
Flow : Number of Channels
Temperature: Number of Channels
Force: Number of Channels
Stimulation: Describe the type

Recover Password

We will contact you with your login info. 

Newsletter Signup