The HandySens-W is a compact and portable signal conditioner to be used with fiber optic sensors.
$5,250.00
The HandySens delivers pressure measurements at a rate of 250 Hz. An internal manometer automatically corrects for atmospheric pressure change. Upon mating the sensor, the gauge factor is seamlessly transmitted to the HandySens conditioner.
The HandySens is equipped with a large visible LCD display and can be battery operated. It comes with a standard ±5 V output and a RS-232 communication port for real-time data acquisition. The HandySens can be controlled directly using the front-panel keypad or remotely using the standard RS-232 interface. A rugged casing with a removable rubber boot provides good mechanical protection against intensive handling in tough environments.
| Specifications | |
|---|---|
| Number of channels | One |
| Compatibility | iWorx A-IBPFOC fiberoptic pressure sensor |
| Full scale* | -50 mmHg to 300 mmHg relative to atm. (wider range also available) |
| Resolution* | 0.5 mmHg (no averaging) |
| Precision* | 1% FS or 1 mmHg (whichever is greater) |
| Sampling rate | 250 Hz standard |
| Connector compatibility | SC connector (Opsens’ SCPROM connector compatible) |
| Internal manometer | Included for automatic atmospheric pressure correction |
| Output interface | ±5 V (1V/100mmHg) and RS-232 standard |
| Input power and consumption | 9 to 24 VDC – 1.8 W (wall-transformer adapter included) |
| Dimensions (without rubber boot protection) | 45 mm (H) x 105 mm (W) x 165 mm (L) |
| Storage temperature | -40 °C to 70 °C |
| Operating temperature | 0 °C to 45 °C |
| Humidity | 95 % non condensing |
| Light source life span | 40 000 hours MTBF |
1F Fiber Optic Blood Pressure catheter
SA-TCS-6: Heater controller with a 6” x 8” heated bed for mice
SA-TCS-8: Heater controller with a 8"x10" heated bed for rats.
IX-RA-834 with 4 BNC single ended inputs, 4 transducer amplifier inputs, two iWire Digital Interfaces, High and Low Voltage Stimulators, Digital inputs, Digital Outputs, 2 Event marker ports, and ability to synchronize multiple ganged RA units.
LabScribe Data acquisition and analysis software
LabScribe Data acquisition and analysis software with the advanced Blood Pressure analysis module.
The iWorx team is here to help—whether you have a quick question or need hands-on support. Our technical specialists offer one-on-one assistance with setup, troubleshooting, and optimizing your system.
We will contact you with your login info.
By subscribing, you agree with our Privacy Policy and provide consent to receive updates from our company.
